|
|
Loose tube cables are the preferred design for
cables installed outdoors, in ducts, trenches or overhead.
With up to 12 optical fibers in each loose
tube, these cables are ideally suited for high fiber
count "backbone" or trunking applications. Depending on the
materials,
loose tube cables meet a variety of flame tests, including IEEE 383
and UL 1666. CableLAN Products will be happy to provide you with more information about these cables. Call or email us! |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Basic Construction
|
The optical fibers are
enclosed within a hollow thermoplastic tube and each tube is filled with
a moisture resistant gel or powder to prevent water damage to the fiber.
Any number of loose tubes are combined under a common outer jacket. The
cable materials depend upon the required flame rating.
Loose tube cables can contain up to 288 optical fibers. Two versions of loose tube cables are manufactured specifically for nuclear power plants, using any fiber type - 62.5/125, 50/125 (standard performance), 50/125 (10 Gigabit Ethernet performance) and single mode. These fibers are specially made for enhanced radiation resistance. Neither cable type uses PVC materials. The cables are manufactured by Draka Comteq under a 10CFR50, Appendix B quality assurance program. We welcome your review or audit of our facilities and processes. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
S779L
Series
|
Draka
Comteq's S779L series cables are manufactured to meet the flame test
requirements of IEEE 383. Completely non-halogenated, these
PVC-free LSZH cables are used extensively in nuclear
power plants around the world.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
S781L
Series
|
Draka
Comteq's S781L series cables are manufactured to meet the flame test
requirements of IEEE383-1974 and UL 1666 (riser rated). These
PVC-free cables provide a higher level of flame resistance and are used in
installations where a plenum rating may be required.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Optical Fiber Characteristics | The S779L and S781L Series cables are available with any type optical fiber, or in hybrid versions that combine two or more fiber types in one cable. Simply replace the final digits in the part number (-XXY) with the glass code below. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||